Detector AW-CSD311

Operating Voltage Range

9 to 28 VDC Volts Non-polarized

Standby Current

≤120A@24VDC

Maximum Alarm Current (LED on)

 ≤15mA@24VDC（K Ohm current-limiting resistance）

Fix temperature Alarm

570C (1350F) A1R

DETECTOR AW-CSD381

Operating Voltage Range:

9 to 28 VDC Non-polarized

Standby Current:

≤120uA@24VDC

Maximum Alarm Current(LED on):

≤15mA@24VDC

（1K Ohm current-limiting resistance）

Operating Humidity Range:

≤95%RH(40℃±2℃)RelativeHumidity,

Non-condensing

Detector AW-CSD812

Operating Voltage Range

9 to 28 VDC Volts Non-polarized

Standby Current

≤120uA@24VDC

Maximum Alarm Current (LED on)

≤20mA@24VDC

(1K Ohm current-limiting resistance)

Detector AW-CTD382

Operating Voltage Range

9 to 28 VDC Volts Non-polarized

Standby Current

≤120uA@24VDC

Maximum Alarm Current (LED on)

Detector AW-CTD321

Operating Voltage Range

9 to 28 VDC Volts Non-polarized

Standby Current

≤120 A@24VDC

Maximum Alarm Current (LED on)

≤20mA@24VDC (1K Ohm current-limiting resistance)

Fix temperature Alarm

570C (1350F) A1R

Detector AW-CTD322

Operating Voltage Range:   

9 to 28 VDC Volts Non-polarized

Maximum Alarm Current(LED on):  

≤48mA@24VDC

Operating Temperature Range:    

-10℃ to 70℃

Detector AW-CSH831

Operating Voltage Range

9 to 28 VDC Volts Non-polarized

Standby Current

≤120μ A@24VDC

Maximum Alarm Current (LED on)

≤15mA@24VDC

(1K Ohm current-limiting resistance)

Detector AW-SST606D

Working power:

A CR17335/17450 lithium manganese battery  B 2* AA alkaline battery

Current:  ≤8µA@3VDC

Maximum Alarm Current (LED on):

≤100mA@3VDC

     Conventional Panel  AW-CFP2166-1

AC INPUT 

220VAC 50/60Hz

+10%  

-15%

DC OUTPUT

24VDC typical

Voltage for MCU

5V

Current @ 220VAC

standby current ≤250mA

Maximum current

1A

Batteries current

750mA maximum, current limited

Batteries

2*12V/ 2.3Ah sealed lead acid gel, self-regulated

Battery low-voltage protection

22.2V

Conventional Panel AW-CFP2166-2C

AC INPUT

220VAC 50HZ

+10%

-15%

DC OUTPUT

24VDC typical

Voltage for MCU

5V for power board MCU, 3.3V for others

Current at 24VDC from PSE

450mA standby current

Maximum current from PSE

2A except batteries charge

Batteries current

1.85A maximum, current limited

Auxiliary output

24VDC +/- 10%, 100 mA max,

current limited, monitored

Conventional Panel AW-CFP2166-4

AC INPUT

220VAC 50HZ

+10%

-15%

DC OUTPUT

24VDC typical

Voltage for MCU

5V for power board MCU, 3.3V for others

Current at 24VDC from PSE

450mA standby current

Maximum current from PSE

2A except batteries charge

Batteries current

1.85A maximum, current limited

Auxiliary output

24VDC +/- 10%, 100 mA max,

current limited, monitored

Conventional Panel AW-CFP266-6C

6 Zone Fire alarm control Panel

Model No.

AW-CFP2166-04-16

Mains supply voltage

110VAC or 240VAC

Internal power supply

27.2VDC

Total output current limited

3A @ 240VAC

Batteries (Default Configuration)

12V2AH*2-24VDC in Total

Conventional Panel AW-CFP2166-8C

8 Zone Fire alarm control Panel

Model No.

AW-CFP2166-04-16

Mains supply voltage

110VAC or 240VAC

Internal power supply

27.2VDC

Total output current limited

3A @ 240VAC

Batteries (Default Configuration)

12V2AH*2-24VDC in Total

Conventional Panel AW-CFP2166-12-32 Zone

12-32 Zone panel

Model No.

AW-CFP2166-12-32

Mains supply voltage

110VAC or 240VAC

Internal power supply

27.2VDC

Total output current limited

3A@240VAC

Batteries (Default Configuration)

12V2AH*2-24VDC in Total

Conventional Manual Call Pont AW-135-C

AW-D135C

Main Voltage

Zone 24V or 12V

Operating current

monitoring status≤20uA, alarm status≤15mA

Application

For indoor use only

Wiring

The promise of two bus system(Zone +, Zone -)

Indicator

Red alarm indicator flashes when it is under normal condition, 

press the manual button lit work

Conventional Push Station AW-CMC2166-6

Working Voltage

24VDC

Work Current

≤40uA @24VDC

Alarm Current

≤50mA @24VDC

Contact Resistance

≤0.02 ohm

Conventional Fire Bell AW-CBL2166-6

Working voltage

20VDC to 28VDC

20VDC to 28VDC

Work current @24VDC

≤50mA

≤50mA

Volume(dB) @1m

≥98dB

≥100dB

Dimensions

150mm*150mm*60mm

200mm*200mm*67.5mm

Conventional Strobe Sounder AW-CSS-2166-2

AW-CSS2166-2

Operating Voltage

Zone 24V

Operating current

≤60mA

Alarm SPL

≥85dB

Flash Period

1 Time/Sec

Environmental

Temperature range: -5 to 40°C (23~104°F)

 Humidity: 5 to 95% RH, non-condensing

Conventional Sounder Beacon AW-D316Model No.                                : AW-D316

Transmission Mode   `  : Cable

Alarm Volume (within 1m) :    ≥80dB

Product Nam                      :    Fire Alarm Horn Strobe

Flash Color and Frequency   :    White, 0.5Hz

Operating Voltage              :    24VDC (20V~28V)

Conventional Flash Light AWCFL2166  

 Operating Voltage

DC24V

Flash Period

≤3s

Temperature Range

-10℃ ~ +50℃

Humidity Range

0%~95%RH

Beam Detector 100meters AW-BK901

Standard Compliance

EN54-12

Fire Detection and Alarm Systems

BS 5839 Part 1:2002

Operating Voltage

20 V to 28 V DC

Entrance LED Indicator AW-EL102

Working voltage: 220VAC/50Hz or 24VDC

Maximum current:5A (220VAC/50Hz) or 8A(24VDC)

Contactor resistance: ≤0.1Ω

2-wire system

Compatible with all the conventional fire alarm control panel

Beam Smoke Detector Programmer AW-BK901

Addressable Panel AW-FP101-108 1LOOP-8LOOP

Detectors

500MAX

Work Voltage

220V AC

Battery

12V/5Ah*2

24V DC Output Current

Max 3A*2

Frequency

50/60Hz

Work temperature

-10~55℃

Work Humidity

95%

Certificate

ISO9001/ROHS

Battery 12V5AH AW-B12052  (1-2LOOPS)2pcs lead acid batteries ,for 1-2 loop panel, standby 8 hours 

Detector Addressable AW-D101

Operating Voltage Range

18V-28VDC   

Alarm Current

≤3mA

Work Current

≤2.5mA

Temperature

-10℃ to 50℃

Smoke Sensitivity

0.1-0.15 dB/m

Standard Number Ref

EN 57-7:2000

Size

99.80mm

Detector Addressable AW-D102

Operating Voltage Range

18V-28VDC 

Alarm Current

≤3mA

Work Current

≤2.5mA

Temperature

-10℃ to 50℃

Fix Temperature Range

57℃ A2R

Rate of Rise Alarm

7.1℃/5S A2R

Standard Number Ref

EN 54-5:2000

Size

99.80 mm

Detector Addressable AW-103

Operating Voltage Range

18V-28V DC

Alarm Current

≤3mA

Work Current

≤2.5mA  

Temperature

-10℃ to 50℃

Smoke Sensitivity

0.1-0.15dB/m

Fix Temperature Range

57℃ A2R

Rate of Rise Alarm

7.1℃/5S

Standard Number Ref

EN 54-5:2000

Size

99.80mm

Addressable Manual CallPoint AW-D105

Work Voltage

18V-28V DC  

Work Current

≤4mA

Protection Level

IP 30

Terminals Connection

Loop In±

Loop Out±

Addressable Strobe Sounder AW-D106

Operating Voltage

18V-28V DC 

Work Current

10-60 mA

Standby Current

≤3 mA

Alarm SPL

≥100dB

Flash Period

≤1.0 S

Temperature

-10℃~50℃

Detector Wireless AW-SSD606A

A CR17335/17450 lithium manganese battery  B 2* AA alkaline battery 

Current: 

   ≤8µA@3VDC

Maximum Alarm Current (LED on): 

≤100mA@3VDC

Operating Humidity Range:

≤95%RH(40°C±2°C) 

Operating Temperature Range:

-10°C to 50°C (14°F to 122°F)

Smoke Alarm Sensitivity: 

   0.18-0.26dBM

Alarm level:    

 ≥85db /3m

Addressable Panel (LPCB)AW-FP300

230VAC (-15%, +10%). 47 ~ 63Hz. Max current 0.8A 

Mains fuse 

T3.15AL250V 

Operating voltage 

18.5 ~ 30VDC 

Recommended mains cable 

Screened or standard/black mains cable, cable size 0.75mm2 

Power rating 

Imax.a=1.2A; Imax.b=2.6A; Imin=0.65A 

Max. charging current 

1.2A 

Max. battery supply current 

4A (when the Mains is disconnected) 

Detector(LPCB)AW-D301

Operating Voltage

Loop 24V(18V～28V)

Standby Current

＜0.3mA

Alarm Current

＜1.5mA (without remote indicator)

＜3.5mA (with remote indicator)

Fire LED

Red, Flash in polling, and illuminate in alarming.

Remote indicator output

Polarity-sensitive output, directly connect to remote indicator (built in 10k

resistor in series, max. output current is 2mA); The red indicator will blink in the monitoring status or remain lit in the alarm status.

Detector(LPCB)AW-D302

Operating Voltage

Loop 24V(18V～28V)

Standby Current

＜0.3mA

Alarm Current

＜1.5mA (without remote indicator)

＜3.5mA (with remote indicator)

Class

A2

Fire LED

Red, Flash in polling, and illuminate in alarming.

Remote indicator output

Polarity-sensitive output, directly connect to remote indicator (built in 10k resistor in series, max. output current is 2mA); The red indicator will blink in

the monitoring status or remain lit in the alarm status.

      Detector(LPCB)AW-D303

Operating Voltage          :        24V

Standby Current             :        <0.3mA

Alarm Current                 :        <1.5mA (Without Remote Indicator)

Wiring                               :        Two Wire, Polarity-Insensitive

Manual Call Point(LPCB)AW-D305

Operating Voltage

Signal Loop 24V(18V～28V)

Power 24VDC(20VDC～28VDC)

Standby Current

Loop＜0.8mA ; Power＜2mA

Action Current

Loop＜5mA ; Power＜15mA

Output Capacity

1A@DC30V

Input Mode Setting

NC or NO input mode can be set by the jumper JP4.

Programming Method

Electronically addressed

Code Range

One address within 1~324.

Sounder Beacon(LPCB)AW-D306

op input

DC24V(18-28V),≤1mA(monitoring status),≤3mA(alarm status)

Power input

DC24V(20-28V),≤4mA(monitoring status),≤130mA(alarm status)

Power consumption

≤3.2W@DC24V

EN54-23 Coverage

C-3-8/W-2.4-6(coverage volume see the following figures)

Flash Color and

Frequency

White, 0.5Hz

Light Output

Synchronization

Meets EN54-23

Addressable Fire Bell AW-D109

Work Voltage

18V-28V DC

Standby Current

≤3 mA

Alarm Current

≤50 mA

Certificate

ISO9001/CE/ROHS

Size

110 mm×110 mm

Addressable Monitor Module AW-D110

Operating Voltage

18V-28V DC

Standby Current

≤ 5mA

Alarm Current

≤ 25mA

Temperature

-10℃~50℃

Addressable Supervisory Module AW-D111

Operating Voltage

18V-28V DC       

Standby Current

≤ 5mA 

AUX Output

≤200 mA @24 VDC

Temperature

-10℃~50℃

Addressable Control Module AW-D112

Operating Voltage

18V-28V DC       

Load Capacity

≤ 200 mA   

Standby Current

≤ 5mA

Temperature

-10℃~50℃

Addressable Relay Module AW-D113

Operating Voltage

18V-28V DC      

Standby Current

≤ 3mA

Alarm Current

≤ 30mA

Relay Capacity

2A@ 24VDC &

1A@ 25VAC

Protection Level

IP 30

Temperature

-10℃~50℃

Isolator Module AW-D114

Standby Current

≤ 25 mA

Alarm Current

≤ 80 mA

Output Current

≤900mA

Protection Level 

IP 30

Temperature

-10℃~50℃

Addressable Annunciator AW-D116

Operating Voltage

18V-28V DC

Work Current

10-30mA

Temperature

-10℃~50℃

Addressable Annunciator Board AW-D117/D118

Operating Voltage

18V-28V DC

Work Current

10-30mA

Temperature

-10℃~50℃

Addressable Sounder Base AW-D120

18~28VDC

Warranty:

2 Years

Standby Current:

≤3mA

Alarm Current:

≤60mA

Work Temperature::

-10℃~50℃

Addressable Power Transmitter AW-D121

         Programmer AW-PR101

Loop Isolator (LPCB) AW-D314

24V

Standby Current

＜3mA

Capacity

32 devices

Indicate

Yellow (flashes when polling, illuminates in action.)

Maximum Line Voltage ( VMAX)

28V

Addressable LPG Detector AW-D315                  Two Wire, Polarity Insensitive

Programming       :                Electronically Addressed

Alarm Current      :                <1.5mA (Without Remote Indicator)

Standby Current  :                <0.3mA

Model No.             :             AW-D315

Conventional Sounder Beacon(LPCB)AW-D316

Operating Voltage

Power: 24VDC (20V~28V)

Operating Current

≤100mA

EN54-23 Coverage

C-3-8/W-2.4-6(coverage volume see the following figures)

Flash Color and Frequency

White, 0.5Hz

Light Output Synchronization

Meets EN54-23

Addressable Input/Output Module AW-D319

Operating Voltage

Signal Loop 24V(18V～28V)

Power 24VDC(20VDC～28VDC)

Standby Current

Loop＜0.8mA ; Power＜2mA

Action Current

Loop＜5mA ; Power＜15mA

Output Capacity

1A@DC30V

Input Mode Setting

NC or NO input mode can be set by the jumper JP4.

Reapeter AW-RP2188

Executive standard

General Technical Conditions for Fire Indicating Panels (GB17429-1998)

Display capacity

Each display panel can display the fire alarm messages of floors -10~90 and at most 99 fire alarm messages or feedback messages.

Wiring system

Four-wire system, power lines (+24V, GND) and RS485 signal lines (485A, 485B)

 Programmer AW-CODER2188 1600mAh lithium battery;

• External 24V/500mA DC can be used as direct work power supply or to charge the battery;

• Working current: 15mA—170mA, standby current: 15mA;

• Ambient temperature: -20℃～60℃, relative humidity: 5%～95%.

Graphic Monitoring Computer AW-AW-CRT9000

CPU

Basic frequency 1.5G or above

Memory

Above 256m

Mainboard

With PCI slot

Hard disk

80G or above

Graphic card

16K color, above 800*600

Addressable Fire Telephone Panel AW-FT599

Power supply

Mains power: AC 220V (+10%, -15%, 50Hz)

Standby power supply: External DC24V

Bus current

≤600mA

Frequency range

300~3400Hz

Addressable Fire Telephone Jack AW-D501

Power supply

Mains power: AC 220V (+10%, -15%, 50Hz)

Standby power supply: External DC24V

Bus current

≤600mA

Frequency range

300~3400Hz

Transmission attenuation

≤5dB

Recording duration

more than 20min

Conventional Fire Telephone Handset AW-D502

Operating Voltage

AC220V 50HZ or DC24V

Alarm Current

≤0.5A

Temperature Range

-10 ºC ~ +40ºC

Other Details

Frenquency Range: 300-3400Hz(±3dB)

Cross talk Level: ≤-60dB

Sending Allowance: ≤5dB

Conventional Fire Telephone Jack AW-D504

Power supply

Mains power: AC 220V (+10%, -15%, 50Hz)

Standby power supply: External DC24V

Bus current

≤600mA

Frequency range

300~3400Hz

Transmission attenuation

≤5dB

Recording duration

more than 20min

Length of bus

≤1,500m

Addressable Fire Telephone Handset AW-D505

Fire Telephone Handsets Aw-Fhs101

Power Supply:

AC 220V 50Hz or DC 24V

Extension Loop Resistance:

Not More Than 1000 Europe

Frequency Range:

300 ~ 3400Hz (± 3 dB)

Crosstalk Level:

Less Than -60dB (600 Ohm Load

Voice Evacuation Control Panel AW-VP350

Panel Name:

Voice Evacuation Control Panel

Model No.:

AW-VP350

Power supply

AC 220V (+10%,-15%, 50Hz)

Remote control trigger mode:

24VDC

Small Ceiling Speaker AW-SPO1

Diameter:180mm

Thickness: 60mm

Ceiling hole::147 mm

Power:3-6W

Voltage: 70/110V

Frequency response：100-16kHz

Sensitivity：90dB

          Big Ceiling Speaker AW-SPO2

Diameter:213mm

Thickness: 65mm

Ceiling hole::170 mm

Power:6-10W

Voltage: 70/110V

Frequency response：100-16kHz

Wall Mounted Speaker AW-SP03Size: 260×185×120mm

Power:10-15W

Voltage: 70/110V

Frequency response：100-16kHz

Sensitivity：90dB

Loudest pressure level (1m)： 95dB

Apollo Smoke Detector 55000-316APO

Power-up surge current

0.115mA

Maximum power-up time

30 seconds

Status indicator - Alarm

Red

Status indicator - Fault

Off

Quiescent current

50μA

Quiescent current tested at

24V dc

Supply voltage (max)

33V dc

Supply voltage (min)

9V dc

Apollo Smoke Detector 55000-216APO

0% to 95% RH (no condensation or icing)

Operating temperature:

-20 to 60°C

Storage temperature:

-30 to 80°C

Weight:

102g

Color:

white

Apollo Heat Detector 55000-126 APO

Humidity (max)

95% RH

Humidity (min)

0% RH

Humidity Note

no condensation or icing

Humidity

0% to 95% (no condensation or icing)

Operating temperature

20 to 90°C

Apollo Detector Base 45681-      200APO      

One-way fit

Easy to wire

Contains an earth connector

Contains no electrical parts

Terminal for remote indicator

Apollo Heat Detector 55000-        217APO  

Radioactive Isotope Activity: 33.3kBq

Alarm Current (At 24 Volts): 52mA

Holding Voltage (Min): 6V

Minimum Voltage To Light Alarm LED: 12V

Alarm Reset Time: 1s

Apollo Heat Detector 55000-315APO

Power-up surge current

0.115mA

Maximum power-up time

30 seconds

Status indicator - Alarm

Red

Status indicator - Fault

Off

Quiescent current

50μA

Quiescent current tested at

24V dc

Supply voltage (max)

33V dc

Supply voltage (min)

9V dc

Apollo Detector Base 45681-248APO

Operating voltage:

9 - 33 V DC

Operating temperature:

-20°C to 60°C

Storage temperature:

-20°C to 60°C

Approvals:

CPD

LPCB

Apollo Heat Detector 55000-122APO

Polarity

L1 & L2 are polarity insensitive

Holding voltage

6 to 6V

Holding voltage (max)

6V

Holding voltage (min)

6V

Minimum voltage to light alarm LED

12V

Apollo Smoke Detector  55000-317APO

Power-up surge current

0.115mA

Maximum power-up time

30 seconds

Status indicator - Alarm

Red

Status indicator - Fault

Off

Quiescent current

50μA

Quiescent current tested at

24V dc

Supply voltage (max)

33V dc

Apollo Heat Detector 55000-146APO

Humidity (max)

95% RH

Humidity (min)

0% RH

Humidity Note

no condensation or icing

Humidity

0% to 95% (no condensation or icing)

Apollo Detector Base 45681-206APO

 One-way fit

 Easy to wire

 Contains an earth connector

Conventional Manual Call Point      55100-001APO

Humidity (max)

93% RH

Humidity (min)

0% RH

Humidity

0% to 93% (no condensation or icing)

Humidity Note

no condensation or icing

Operating temperature (min)

-10°C

Operating temperature (max)

55°C

Conventional Manual Call POint SC2900-001  

 Easy access, front reset mechanism Ergonomic reset key (supplied)

 EN 54-11 certified

 170° viewable LED

 Suitable for flush or surface mounting 

Manual Call Point- MEDC Style 55000-960APO

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Protocol voltage

5 to 9V peak to peak

Quiescent current

300μA

Quiescent current tested at

24V dc

IS Manual Call Point 55200-940APO

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Protocol voltage

5 to 9V peak to peak

Power-up surge current

1mA

Quiescent current

300μA

Quiescent current tested at

24V dc

Polarity

L1 & L2 are polarity sensitive

Conventional Exd Manual Call Point 29600-508APO

Supply voltage:

250 V ac max., 50 V dc max.

Operating temperature:

-40°C to +55°C

Ingress Protection:

IP66

Weight:

0.8kg

Materials housing:

Marine grade copper-free LM6 aluminium

I.S. Manual Call Point 55100-940APO

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Protocol voltage

5 to 9V peak to peak

Power-up surge current

1mA

Quiescent current

300μA

Quiescent current tested at

24V dc

Polarity

L1 & L2 are polarity sensitive

Manual Call Point (OutDoor) 58100-950APO

Humidity (max)

0% RH

Humidity (min)

95% RH

Operating temperature (min)

-30°C

Operating temperature (max)

70°C

Operating temperature

-30 to 70°C

IP rating

Designed to

Operating temperature

-22 to 158°F

Operating temperature (max)

158°F

Operating temperature (min)

-22°F

Discovery Manual Call Point (Isolating)58100-908APO

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Protocol voltage

5 to 9V peak to peak

Power-up surge current

1mA

Quiescent current

100μA

Polarity

L1 & L2 are polarity sensitive

Loop powered

Yes

Conventional Manual Call Point WT/LED(yellow)55100-002APO

Humidity (max)

93% RH

Humidity (min)

0% RH

Humidity

0% to 93% (no condensation or icing)

Humidity Note

no condensation or icing

Operating temperature (min)

-10°C

Operating temperature (max)

55°C

Operating temperature

-10 to 55°C

IP rating Value

IP24D

Operating temperature

14 to 131°F

Operating temperature (max)

131°F

Operating temperature (min)

14°F

I.S.Manual Call Point-MEDC Style (GLASS & FLIP LID) 55000-961APO

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Protocol voltage

5 to 9V peak to peak

Quiescent current

300μA

Quiescent current tested at

24V dc

Conventional I.S.Manual Call Point (WithOut LED) 55000-031APO

Colour

Red

Weight

180g

Product length

89mm

Product width

59.2mm

Product depth

93mm

Key type

KAC Manal Call Point test & reset key

Conventional I.S. Manual Call Point-OUTDOOR(WithOut LED) 55100-033APO

Colour

Red

Weight

350g

Product length

97.5mm

Product width

71mm

Product depth

93mm

Key type

KAC Manal Call Point test & reset key

Conventional Manual Call Point -OUTDOOR (WITHOUT LED)55100-003APO

Colour

Red

Weight

350g

Materials housing

Polycarbonate

Product length

110mm

Product width

110mm

Product depth

74mm

Discovery Manual Call Point-OUTDOOR- 58200-950APO

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Protocol voltage

5 to 9V peak to peak

Power-up surge current

1mA

Maximum power-up time

1 second

Quiescent current

100μA

Quiescent current tested at

24V dc

Polarity

L1 & L2 are polarity sensitive

Conventional Open-Area Sounder- RED BODY-29600-322APO

Supply voltage (min)

9V dc

Supply voltage (max)

60V dc

Supply voltage (Vmin-Vmax)

9 to 60V dc

Conventional Open-Area Sounder VID-Red Body-(Red Flash) 29600-323  For use with conventional systems

A choice of 32 tones including all the major international standards

Simple ‘First Fix’ installation

Volume control - typical 8dB

Conventional Open-Area AV Time Saver Base-Shallow 29600-320APO  For use with conventional systems

A choice of 32 tones including all the major international standards

Simple ‘First Fix’ installation

Volume control - typical 8dB

Coventional Open-Area AV Time Saver       Base-Deep 29600-321APO              For use with conventional systems

A choice of 32 tones including all the major international standards

Simple ‘First Fix’ installation

Volume control - typical 8dB

Conventional I.S. Open-Area Sounder VID-Red Body(Red FLash)29600-446APO

Colour

Red

Product length

95mm

Product width

89mm

Product depth

116mm

Weight

350g

Product length

3.74in

Product width

3.5in

Product depth

4.57in

Conventional Fire Bell (6'') 29600-400APO Low current consumption

Universally-recognisable sound

Xpert 7 Base 45681-210APO

Terminal functions L1 in

-L1 in Loop in & out, double terminal

Polarity

L1 & L2 are polarity insensitive

Optical Smoke Detector 55000-               600APO                                           

5 to 9V peak to peak

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Power-up surge current

1mA

Maximum power-up time

4 seconds

Status indicator - Alarm

Red

XP95 Heat Detector (CS) 55000-401APO

Protocol voltage

5 to 9V peak to peak

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Power-up surge current

1mA

Maximum power-up time

4 seconds

XP95 Heat Detector  (A2S) 55000-400APO

Protocol voltage

5 to 9V peak to peak

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Power-up surge current

1mA

Maximum power-up time

4 seconds

Isolator Negative 55000-720APO

Storage temperature

-30 to 80°C

Storage temperature (max)

80°C

Storage temperature (min)

-30°C

XP95 Optical Smoke Detector 55000-620APO

Protocol voltage

5 to 9V peak to peak

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Power-up surge current

1mA

Maximum power-up time

4 seconds

XP95 Heat Detector (A2S)

Protocol voltage

5 to 9V peak to peak

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Power-up surge current

1mA

Maximum power-up time

4 seconds

         XPERT 7 Base -Isolating                  Materials terminals

Nickel plated stainless steel

Product depth

24mm

Product diameter

100mm

Product depth

0.94in

Product diameter

3.94in

XP95 Manual Call Point Isolating 55100-908APO

Protocol voltage (max)

9V

Protocol voltage (min)

5V

Protocol voltage

5 to 9V peak to peak

Power-up surge current

1mA

Maximum power-up time

1 second

Open Area Sounder 55000-001APO

Max. sound output tone:

100dB (A)

Supply voltage (Vmin.-Vmax.):

17 to 28V dc

Humidity:

0% to 95% RH (no condensation or icing)

Ingress Protection:

IP65

Operating temperature:

-10 to 55°C

Color:

red

XP95 Open Area Sounder VID-Red Body 55000-005APO

Polarity

L1 & L2 are polarity sensitive

Power-up surge current

1.2mA

Maximum power-up time

<1 second

Quiescent current

330μA

Quiescent current tested at

24V dc

XP95  Open-Area Multi-Tone Sounder Red Body 55000-278APO

Power-up surge current

1.2mA

Maximum power-up time

<1 second

Quiescent current

330μA

Quiescent current tested at

24V dc

Supply voltage (min)

18V dc

Supply voltage (max)

28V dc

Supply voltage (Vmin-Vmax)

18 to 28V dc

       Intelligent Switch Monitor Module                       SA4700-100APO

Protocol voltage (min)

5V

Protocol voltage (max)

13V

Protocol voltage

5 to 13V peak to peak

Quiescent current

500μA

Quiescent current tested at

24V dc

Supply voltage (max)

35V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 35V dc

XP95  Zone Monitor Module-Isolating 55000-845 APO

Protocol voltage (min)

5V

Protocol voltage (max)

9V

Protocol voltage

5 to 9V peak to peak

Supply voltage (max)

28V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 28V dc

Power-up surge current

3.5mA

Maximum power-up time

150ms

Stabilization time on power up

4s

Intelligent INPUT-OUTPUT Module SA4700-102APO

Protocol voltage (min)

5V

Protocol voltage (max)

13V

Protocol voltage

5 to 13V peak to peak

Quiescent current

500μA

Quiescent current tested at

24V dc

Supply voltage (max)

35V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 35V dc

Intelligent INPUT-OUTPUT Module (250V AC) SA4700-103APO

Humidity

0% to 95% (no condensation or icing)

Humidity Note

no condensation or icing

Humidity (max)

95% RH

Humidity (min)

0% RH

Operating temperature

-40 to 70°C

Operating temperature (max)

70°C

Intelligent INPUT/OUTPUT Module (TWIN) SA4700-104APO

Protocol voltage (min)

5V

Protocol voltage (max)

13V

Protocol voltage

5 to 13V peak to peak

Quiescent current

500μA

Quiescent current tested at

24V dc

Supply voltage (max)

35V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 35V dc

Intelligent Switch Monitor Module(TWIN) SA6700-100APO

Protocol voltage (min)

5V

Protocol voltage (max)

13V

Protocol voltage

5 to 13V peak to peak

Quiescent current

500μA

Quiescent current tested at

24V dc

Supply voltage (max)

35V dc

XP95 AV Control Module Isolating 55000-852APO

Protocol voltage (min)

5V

Protocol voltage (max)

9V

Protocol voltage

5 to 9V peak to peak

Supply voltage (max)

28V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 28V dc

XP95 DIN-Rail Mini Switch Monitor Module Isolating 55000-760APO

Protocol voltage (min)

5V

Protocol voltage (max)

9V

Protocol voltage

5 to 9V peak to peak

Supply voltage (max)

28V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 28V dc

Power-up surge current

0.8mA

Quiescent current, 20kΩ EOL fitted

0.2mA

Addressable INPUT/OUTPUT Module 55000-847

Loop voltage: 17-28V DC

Switch on Surge: 3.5 mA

Input monitoring voltage: 9-11V

Continuous current: 1A

IP classification: IP54

Dimensions: 150 x 90 x 48 mm

Finish color: White 

Conventional End To End Beam               Detector 29600-929                                    Full icon-based, easy-to-use LCD display on the low level controller for ease of commissioning, testing and maintenance

Aesthetically pleasing to suit modern architectural buildings and heritage sites

Range 5 to 120 metres

Intelligent Reflective Beam Detector Auto Aligning SA7100-100APO

Colour

Grey

Materials housing

Polycarbonate

Controller with base - height

230mm

Controller with base - weight

1000g

Controller with base - width

202mm

Detector with base - height

131mm

Detector with base - weight

537g

Bram Detector BackBox 29600-241

The Beam Detector Backbox allows easy first fixing of the cabling and terminations to the XP95 Reflective Beam Detector. The backbox can be surface or flush mounted. 

Conventional Auto Aligning Beam Detector 29650-069

The Conventional Reflective Beam Detector comprises of a ground level controller, detector head with auto-aligning feature, integral laser for rapid initial alignment and single prism. An additional detector head can be added to the controller. 

Reflective Beam Detector(ADD-ON) Auto Aligning 29650-070                  Supply Voltage: 14-36 V DC

Operating Current: 1 Detector: 6mA; 2 Detectors: 8.5mA

Operating Current: 37mA

Response Threshold: 10-60%

Delays (User settable, default 35%): Alarm: 2-30 Seconds; Fault: 2-30 Seconds

IP Rating: 54

Optical Wave Length: 850nm

Beam Detector Extension Kit (50-100M)29600-526

Extension Kit for the Auto-Aligning Beam Detector. 

Beam Detector Bracket 29600-527

Universal Bracket for the Auto-Aligning Beam Detector. 

Beam Detector Surface Mouting Plate  29600-528                                                 Surface Mounting Plate for Auto-Aligning Beam Detector. 

Beam Detector Prism Plate (4PRISMS) 29600-529

Beam Detector Prism Plate (1PRSM)29600-530

Apollo Xpert  Card 38531-771    Simplifies and speeds up installation and commissioning

Uses patented proven technology

Address remains the same, no matter how often detectors are replaced

Flexibility to create any address  

XP95 Open Area Multi-Tone Sounder VID Red BOdy (RED FLash)55000-291APO

Power-up surge current

1.2mA

Maximum power-up time

<1 second

Quiescent current

330μA

Quiescent current tested at

24V dc

Supply voltage (max)

28V dc

Supply voltage (min)

18V dc

Supply voltage (Vmin-Vmax)

18 to 28V dc

XP95 Open-Area VID-Red Body(RED FLASH)55000-877APO

Power-up surge current

1mA

Quiescent current

150μA

Quiescent current tested at

24V dc

Supply voltage (max)

28V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 28V dc

XP95 Open-Area VID-White Body 55000-878APO

Power-up surge current

1mA

Quiescent current

150μA

Quiescent current tested at

24V dc

Supply voltage (max)

28V dc

Supply voltage (min)

17V dc

Supply voltage (Vmin-Vmax)

17 to 28V dc

Discovery Open-Area Voice Sounder VID -Red Body (Red Flash)-Isolating 58000-030APO                                             Four pre-set message pairs

Capable of up to 15 tone message pairs

Low current and high volume

Fully synchronised

Set up and test at point of installation